Kenmore 795.58812.900, Руководство по обслуживанию

Страница: 6 / 85

1.How to adjust the Refrigerator Door Height
(First identify your screw type, it could vary)
Make the refrigerator level first. (If the refrigerator is not installed on a flat floor, the height of freezer and
refrigerator door may not be the same
1) If the freezer door is lower than the refrigerator 2) If the freezer door is higher than the refrigerator door:
door: - Type 1
Make them level by inserting flat ( - type) driver into the groove Make them level by inserting flat (- type) driver into the
of the left height adjusting screw and rotating it clockwise ( 1 ) groove of the right height adjusting screw and rotating it
clockwise ( 1 )
3. HOW TO INSTALL THE REFRIGERATOR
Adjust the level when the refrigerator door is lower than the
freezer door during the use of the refrigerator.
1. Using the narrow side of the tool for adjustment, turn the
adjustment hinge pin 2 ( ) clockwise or ( )
counterclockwise to level the refrigerator and freezer door.
2. After setting the level of the door, turn the keeper nut
Counterclockwise to tighten.
Do not force too hard to level the height. The hinge pin can be
pulled out. (Adjustable range of height is a maximum of
½”(1,27cm)).
The refrigerator door will close smoothly by raising the front side
by adjusting the height adjusting screw. If the door does not close
properly because it is improperly adjusted, the performance of
the refrigerator will be affected.
- 6 -
Up
Down
Tool for
adjustment
¬
A
djustment
hinge pin