![Kenmore 795.5101 Series Скачать руководство пользователя страница 11](http://html.mh-extra.com/html/kenmore/795-5101-series/795-5101-series_use-and-care-manual_1954931011.webp)
11
REFRIGERATOR INSTALLATION
DOOR ALIGNMENT
Before adjust the doors, remove the base grille.
See
BASE GRILLE INSTALLATION
for reference.
First select your adjusting tool, it could vary.
Type 1
Adjusting tool: flat blade screwdriver
If the freezer compartment door is lower than
the refrigerator compartment door, level them by inserting
a flat blade screwdriver into the groove of the left leveling
leg and rotating it clockwise.
Left leveling
leg
Height
If the freezer compartment door is higher than the
refrigerator compartment door, level them by inserting a
flat blade screwdriver into the groove of the right leveling
leg and rotating it clockwise.
Right leveling leg
Height
difference
difference
Height
difference
Height
difference
Type 2
Adjusting tools:
(19 mm)
wrench ” (8 mm) and
wrench ¾”
AFTER LEVELING THE DOOR HEIGHT
Make sure the front leveling legs are completely
touching the floor.
Height
difference
Height
difference
Using a ¾” (19 mm) wrench, t urn the keeper nut clockwise
to loosen the keeper nut.
Keeper nut
Adjustment
hinge pin
Wrench
Up
Down
Using a ” (8 mm) wrench, turn the adjustment hinge pin
c
refrigerator
clockwise or ounterclockwise to level the
and
After setting the level door, turn the keeper nut
counterclockwise to tighten.
Do not overtight the door adjustment screw. The hinge pin
can be pulled out. (Adjustable range of height is a maximum
of ½” (1.27 cm)).
freezer door.
5
16
5
16
Содержание 795.5101 Series
Страница 32: ......