10
DISHWASHER USE
Detergent Dispenser
The detergent dispenser has 2 sections. The Pre-Wash
section empties detergent into the dishwasher when you
close the door.
The larger Main Wash section automatically empties
detergent into the dishwasher during the main wash. (See
the “Cycle Selection Charts.”)
■
Use automatic dishwashing detergent only. Other
detergents can produce excessive suds that can
overflow out of the dishwasher and reduce washing
performance.
■
Add detergent just before starting a cycle.
■
Store tightly closed detergent in a cool, dry place.
Fresh automatic dishwasher detergent results in better
cleaning.
NOTE:
Do not use detergent if you have selected a rinse
cycle.
Filling the dispenser
1.
If the dispenser cover is closed, open the cover by
pushing the cover latch.
2.
Fill the Main Wash section with detergent. See “How
much detergent to use.”
3.
Fill the Pre-Wash section if needed. (See “Cycle
Selection Charts.”)
4.
Close the dispenser cover.
The cover will open during the cycle to dispense the
detergent.
How much detergent to use
■
The amount of detergent to use depends on the
hardness of your water and the type of detergent. If you
use too little, dishes will not be clean. If you use too
much in soft water, glassware will etch.
■
Water hardness can change over a period of time. Find
out your water’s hardness by asking your Sears Sales
Associate, local water department, water softener
company, or county extension agent.
†
It might be necessary to use the Hi Temp wash option for
best wash performance in very hard water.
NOTE:
Fill amounts shown are for standard powdered
detergent. Amounts may vary if you use liquid or
concentrated powdered detergent. Tablet detergents
should be placed in the main wash section of the
detergent dispenser with the cover closed. Follow
instructions on the package when using liquid dishwasher
detergent, concentrated powdered detergent or tablet
detergent.
IMPORTANT:
See “Cycle Selection Charts” for which
detergent dispenser sections to use with each cycle.
A. Cover
B. Main Wash section
C. Cover latch
D. Pre-Wash section
A
B
C D
Where to fill
Top of 3rd step (9 tsp or 45 mL)
Top of 2nd step (6 tsp or 30 mL)
Top of 1st step (3 tsp or 15 mL)
Soft to Medium Water (0-6 grains per gallon)
[typical water softener water and some city water]
Soil Level
Main Wash
Pre-Wash
Lightly soiled/
Pre-rinsed
dish loads
3 tsp (15 mL)
[top of 1st step]
3 tsp (15 mL)
[top of 1st step]
Normally soiled
dish loads
6 tsp (30 mL)
[top of 2nd step]
6 tsp (30 mL)
[top of 2nd step]
Heavily soiled
dish loads
9 tsp (45 mL)
[top of 3rd step]
6 tsp (30 mL)
[top of 2nd step]
Medium to Hard Water (7-12 grains per gallon)
†
[well water and some city water]
Soil Level
Main Wash
Pre-Wash
All soil types
9 tsp (45 mL)
[top of 3rd step]
6 tsp (30 mL)
[top of 2nd step]
