Kenmore 587.1401 Series, Инструкция по использованию и уходу, Страница: 7 / 32

7
Operating Instructions
NOTE
Your Tower Wash System
®
dishwasher uses a proven single, rotating arm with a
telescoping set of wash jets for targeting the upper rack.
Cycles begin with a drain to remove liquid that may have been added during
loading. Following that, you may hear a series of wash segments for washing and
later rinsing. These wash segments start with the addition of water, then follow
by the spraying of dishes and then end by draining the wash or rinse fl uid. Other
actions will take place during the cycle that you will not be able to hear. these
include addition of detergent, heating of the fl uid, dispensing of rinse agent, and
pulsed heating of the dishware after thr fi nal drain to improve drying.
GETTING STARTED
1. Load dishwasher (See Preparing and Loading Dishes).
2. Add detergent (See Dishwasher Dispenser & Detergents).
3. Add rinse aid (See Rinse Aid).
4. Turn dial clockwise to select cycle (See Wash Cycle Selection).
5. Select desired OPTION (See Energy Option).
6. Run hot water faucet nearest dishwasher until water is hot. Turn water o
ff .
7. To start, Close the door to latch.
CAUTION
Before starting dishwasher be sure tht the water is connected and turned on. Failure
to do so may cause damage to the pump seal and result in water leakage.