Kenmore 405.35040510 Скачать руководство пользователя страница 2

CAUTION 

Read and follow all instructions before operating fan. Do not use fan if any part 

are damaged or missing.

WARNING 

1. This appliance is not intended for use by young children or infirm persons 

    without supervision.

2. Young children should be supervised to ensure that they do not play with the 

    appliance.

3. This appliance has a polarized plug (one blade is wider than the other). To 

    reduce the risk of electrical shock, this plug is intended to fit in a polarized 

    outlet only one way. If the plug does not fit fully into the outlet, reverse the 

    plug. If the plug still does not fit, contact a qualified electrician. Do not attempt 

    to bypass this safety feature.

4. If the supply cord is damaged ,it must be replaced by manufacturer or its 

    service agent or a similarly qualified person in order to avoid a hazard.

5. To reduce the risk of fire or electrical shock, do no use this fan with any solid 

    state speed control device.

6. Changes or modifications to this unit not expressly approved by the party 

    responsible for compliance could void the user’s authority to operate the 

    equipment.

1

READ AND SAVE THESE INSTRUCTIONS

RULES FOR SAFE OPERATION 

1. Never insert fingers, pencils, or any other object through the housing when the 

    fan is running. Disconnect it when moving from one location to another.

2. Disconnect fan when moving from one location to another.

3. Disconnect fan when removing grilles for cleaning.

4. Do not leave the fan running unattended.

5. Be sure the fan is on a stable, flat surface when in operation.

6. The rules about cords and plugs are as follows:

    (1) This product uses overload protection (fuse). A blown fuse indicates an 

         overload or short-circuit situation. If the fuse burns out, unplug the 

         product from the outlet. Replace the fuse as per the user servicing 

         instructions (follow product marking for proper fuse rating) and check 

         the products.If the replacement fuse blows, a short-circuit may be present 

         and the product should be discarded or call Customer Assistance at 

         1-866-646-4332 to arrange for possible repair. 

    (2) Do not operate any fan with a damaged cord or plug. Discard fan or call

         Customer Assistance at 1-866-646-4332 to arrange for possible repair.

    (3) D o not run cord under carpeting. Do not cover cord with throw rugs, 

         runners, or similar coverings. Do not route cord under furniture or

         appliances. Arrange cord away from traffic area and where it will 

         not be tripped over.

Содержание 405.35040510















Отзывы: