8
4. Remove
7” Round Duct Plate
from top/back of hood (see
illustration beside).
RECIRCULATION
COVER PLATE
SCREWS
ELECTRICAL
POWER CABLE
KNOCKOUT
7” ROUND
DUCT PLATE
2 SCREWS
5. Remove Electrical Power Cable Knockout from top
(vertical exhaust) or back (horizontal exhaust) of
hood. Install an appropriate strain relief, 1/2” diameter
(not included).
NON-DUCTED INSTALLATIONS ONLY
6. Remove 3 screws retaining the recirculation cover plate
(shaded part in illustration beside) to the hood. Discard
this plate with its screws.
3. Remove the
wiring cover
(shaded part on illustration
beside) by sliding it out from the hood and set it aside.
