15
UNPACKING
After removing all parts and hardware pack from the top of the shipping box, and when the only part showing is
the grill head, use a
b
ox cutting knife to slice down the sides of the box. Be careful of staples along shipping box
edges.
Remove the steel and cardboard corner supports from the box and the Styrofoam side pieces from the grill head.
With the aid of an assistant, rest the grill head on one of the Styrofoam pieces on each end to protect the grease
tray. Allow grill head to rest on Styrofoam pieces until placing grill head on cart during assembly.
Open grill lid and remove all packaged parts and packing material.
WARNING: Assemble the grill on a flat level surface. Compare the parts and hardware with the list and
diagrams. Do not attempt assembly if any part is missing or damaged.
Attach the casters to the bottom panel with 4 screws each as shown. Attach the two locking casters at
the back of the grill. After attaching all casters, turn the bottom panel over.
Attach the door magnet to the holes in the front of the bottom panel with 2 screws. Do not fully tighten
at this time.
5/32-32 x 3/8
″
Screw
Qty. 2
Door Magnet
Bottom Panel
Caster
Locking Caster
Bottom Panel
1/4-20 x 5/8
″
Screw
Qty. 16
Содержание 148.23682310
Страница 64: ...64 美 ...