7
Cordon
d’ alimentation
Poignée de
transport
Corchet supérieur
à relâche rapide
du cordon
CORDON D'ALIMENTATION
1.
S'assurer que le crochet de rangement
du cordon se trouve à la position
redressée de la manière indiquée.
2.
Enrouler sans serrer le cordon
d'alimentation autour du crochet de
rangement du cordon et de la poignée
de transport.
3.
Bloquer la fiche du cordon
d'alimentation sur le cordon
d'alimentation.
AVERTISSEMENT
Risque de chocs électriques ou de
blessures corporelles
Le fait d'enrouler le cordon trop serré le
soumet à des tensions qui pourraient
l'endommager. Un cordon endommagé
est source de chocs électriques et peut
causer des blessures corporelles ou des
dommages.
FRANÇAIS
TO REMOVE DUST BAG
1.
Insert fingers in
the latch recess at
the top of the dust
bag cover and
pull to open.
Remove dust bag
cover from front
of vacuum.
2.
Grasp the dust
bag collar and pull gently, carefully
removing the
dust bag from
the dust bag
holder.
3.
Throw away
the used dust
bag.
Do not reuse
dust bag.
4.
Check the
dust bag holder
and the motor
safety filter for
dirt or clogs.
DUST BAG REPLACEMENT
TO REPLACE DUST BAG
1.
Fold the
safety seal tab
on the new
dust bag
away from the
opening that
fits on the bag
support.
Note:
See
2.
Push dust bag
collar opening
completely over
the dust bag holder
as far as it will go.
3.
Tuck the bag
into the dust
bag chamber.
Be sure the
bottom and
sides of the
dust bag are
completely
within bag
cavity prior to
closing the bag
cover.
Dust Bag
Chamber
Dust Bag
Holder
Motor
Safety
Filter
Dust
Bag
Safety
Seal Tab
Tuck Dust Bag In
All Around Edges
Dust Bag
Collar
WARNING
Always unplug power cord from
electrical outlet before performing
maintenance to the vacuum cleaner.
Dust Bag
Cover
CAUTION
NEVER EMPTY OUT AND REUSE A
DUST BAG. Very fine materials, such as
carpet freshener, face powder, fine
dust, plaster, soot, etc. can clog the bag
and cause it to burst before it is full.
Change bag more often when vacuum-
ing these materials.
1
2
Motor Safety Filter
Under Dust Bag
Cover Tab
4.
Insert cover
tab in bottom
and rotate the
bag cover
closed. You will
hear a distinct
snap when cover
is securely
latched.
Check to see that the dust bag is fully
placed in the bag chamber.
NOTE: See Motor Safety Filter on page 16.
Item Style No.
DUST BAG Z
16