Kenmore 11029852990 Скачать руководство пользователя страница 35

Страница: 35 / 37

Problem

Possible Cause

Solution

Tearing

Overloading. Improper

Loads should move freely during

use of washer.

wash. Wash smaller loads.

Improper use of chlorine

Do not pour chlorine bleach directly

bleach. Undiluted bleach

on load. Wipe up bleach spills.

will damage fabrics.

Sharp items not removed

Clean out pockets before washing.

from pockets; fasteners

Zip zippers before washing.

not fastened.

Items damaged before

Mend rips and broken threads in

washing.

seams before washing.

Stains on

Improper use of fabric

Dilute fabric softener and add to

Load

softener in washer or dryer.

deep rinse only.

Iron in water (rust).

Install an iron filter.

Under use of detergent causing

Use enough detergent to remove

soil to be redeposited.

soil and hold it in suspension.

Dye transfer due to not

Sort dark clothing from whites

sorting loads properly.

and lights.

Dye transfer due to not

Unload the washer as soon as

unloading washer promptly.

it stops.

Not removing load promptly.

Unload the washer as soon as it stops.

Wrong cycle for fabrics

Use cold rinses and cycles with slow

being washed.

spin speeds to reduce wrinkling.

Overloading.

Loads should move freely during
wash. Wash smaller loads.

Wash water not warm enough

Use Automatic Temperature Control

to relax wrinkles. Using warm

(ATC). If safe for fabric, use warm or

rinses.

hot wash water. Use cold rinse water.

Hoses reversed.

Reverse hoses (see “INSTALLATION,”
Sections D & E).

Overloading.

Loads should move freely during
wash. Wash smaller loads.

Clothes wrapped around

Do not wrap items around agitator

agitator.

when loading washer.

Not diluting softener.

Dilute fabric softener in dispenser.

Use of color-safe bleach in

Add color-safe bleach directly to the

chlorine bleach dispenser.

basket. Do not use chlorine bleach
dispenser.

Improper use of chlorine bleach. Always measure bleach before adding

to the dispenser. Carefully pour into
the dispenser. Wipe up bleach spills.

Load is
Wrinkled

Load is
Tangled/
Twisted

Clogged
Dispensers/
Bleach
Leaking/
Bleach on
Wrong Loads

TROUBLESHOOTING

Содержание 11029852990






































Результаты поиска

Содержание 11029852990

Отзывы:

Похожие инструкции для 11029852990

Бренды по названию

Популярные бренды

Kenmore 11029852990, Руководство пользователя и инструкции по установке

Результаты поиска

Содержание 11029852990

Отзывы:

Похожие инструкции для 11029852990

Бренды по названию

Популярные бренды