19
REVIEW INSTALLATION
for your
Benefit
Take a few minutes to complete
this checklist. It will help assure you
that you have a proper installation
and increase your satisfaction with
your Kenmore washer.
M
Check electrical requirements.
Be sure you have correct electrical
supply and recommended grounding
method.
M
Check that you have:
• All the tools you started with.
• Removed all packaging materials.
• Removed shipping strap with
three cotter pins.
• Installed all parts listed on
pages 6-8.
FINAL STEPS
M
Plug power supply cord into
grounded outlet.
M
Remove the blue protective film on
the console and any tape remaining
on washer.
M
Take a few minutes and read the
Operating Instructions (pages 20-28)
to fully understand your new washer.
Then, start the washer and allow it to
complete the ULTRA CLEAN Cycle.
INST
ALLA
TION
M
Check that:
• The washer is level.
• The nuts on the front legs are tight.
M
Check that the water faucets are
turned on.
