Kendal Lighting AC-22452, Инструкция по установке и эксплуатации

Страница: 5 / 9

1. Remove 1 of 3 screws on light kit adapter,and
loosen the other 2 screws. (See Fig.12)
2
.
Gently pull the wire through light kit plate.
Have the key hole over the loosened the screws.
Turn the light kit plate until it get the end of
narrow end. Then, tighten the previously
removed and loosened screws.
(
)
3.Remove 3 screws on light kit plate.
(
see Fig.15)
4
.
Plug together light kit wires from fan to light kit
wires from LED light
(
see Fig.16)
5
.
Tighten the light kit by using the 3 screws
removed in step 3 (see Fig.17)
6
.
Attach the PC shade by locating tabs in light
kit with grooves on the light shade and twist
clockwise until tight
(
see Fig.18)
Fan Airflow Direction
Slide the reverse switch to right or left to obtain
opposite direction of airflow. (See Fig.19)
See Fig 13 & 14
Installing The Light Kit
FIG.18
FIG.19
LIGHT KIT ADAPTER
SCREW
LIGHT KIT ADAPTER
LIGHT KIT PLATE
SCREW
LIGHT KIT
PLATE
SCREW
LIGHT KIT
PLATE
SCREW
LIGHT KIT PLATE
PIN
LED LIGHT
PLUG
SCREW
LIGHT KIT PLATE
LIGHT KIT PLATE
INDENTATION
TAB
LIGHT KIT PLATE
PC SHADE
COUPLING COVER
REVERSE SWITCH
FAN BODY