www.kenall.com | P: 800-4-Kenall | F: 262-891-9701 | 10200 55th Street Kenosha, Wisconsin 53144, USA
This product complies with the Buy American Act: manufactured in the United Stateswith more than 50% of the component cost of US origin It may be covered by patents
found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. ©2019 Kenall Mfg.Co.
4
INSTALLATION INSTRUCTIONS
HBM_F-4938_090418
1. Remove screws and lift cover of fixture.
Loop safety cable under center support.
2. Send straight end through loop end of the
safety cable.
3. Replace cover and secure the cable to the
super-structure.
II. Safety Cable Option
LOOP HANGER
INSTALLATION – HL
(ATTACHED AT FACTORY)
Aircraft cable (not included) is recommended for attaching the fixture structural to the upper structural.
SAFETY RECOMMENDATION
1.
Wire cord leads to power supply leads using
connectors suitable for the gauge and number of
wires being used. Black fixture lead connects to
the supply conductor, white fixture lead connects
to the neutral supply conductor, and the grounding
wire must be connected to a suitable ground.
2.
Hang luminaire by attaching to user supplied chain
or cables.
3.
Connect power cord.
4.
As a safety recommendation, an additional aircraft
cable (not included) should be used to attach the
loop hanger and supporting structure.
LOOP HANGER
CORD WITH
QUICK-DISCONNECT
