X8 SuperSnake GT02XW
Operating manual - EN
6.
Insert the liner sleeve on the liner at the subfeeder end of the cable hose.
7.
With a 10 mm long socket wrench, secure the sleeve at the subfeeder end of the cable hose.
8.
At the subfeeder end of the cable hose, cut the excess wire liner leaving approximately 3…5 mm extrud-
ing from the cable connector end level.
Cut the excess of the steel liner with side cutting pliers and the excess of the Chili liner with a carpet
knife.
© Kemppi
28/35
Rev. 1901