6 – KEMPPI PRO EVOLUTION PROCOOL 30 / 0532
© KEMPPI OY
4.2. EVERY SIXTH MONTHS
The following maintenance opeations should be carried out at least every sixth months:
•
Clean off dust and dirt. Change the cooling liquid and wash up the pipes and water
reservoir with pure water.
•
Check seals, cables and connections. Tighten, if necessary and replace defect parts.
4.3. TROUBLE SHOOTING
See also 3.2. Overheat signal lamp.
Overheat signal lamp is lit.
The unit is overheated.
•
Check water circulation.
•
Check that there is enough free space behind the machine for cooling air circulation.
Text COOLER ERROR on the PROMIG panel
•
Check the liquid hoses for damages.
•
Remove any hose blockages.
•
Check water circulation, add liquid if needed.
For further information and assistance, contact your nearest Kemppi service workshop.
4.4. DISPOSAL OF THE MACHINE
Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and returned to an
environmentally compatible recycling facility. As the owner of the equipment, you should
get information on approved collection systems from our local representative.
By applying this European Directive you will improve the environment and human
health!