background image

5. OPERATION DISTURBANCES

In case of problems contact the KEMPPI works or your KEMPPI dealer.
Check the maintenance objects before the machine is sent to the service repair shop

5.1. OPERATION OF THE OVERLOAD PROTECTION

The overload protections (thermal protections) of the machine operate, if the machine is 

continuously loaded above the rated values or the circulation of the cooling air is blocked. 
The machine is automatically returned into operation, after it has cooled down t a lower 

temperature.

5.2. CONTROL FUSES

As the machine protection there is on control card an 1,0 A slow-blow cartridge fuse in the 

safety voltage circuit.
-  Reason for burning of a fuse might be a damaged control card. 
Use same type and rating of fuse which is marked beside the fuse adapter. 
Damage caused by a wrong type fuse, is not covered by the guarantee.

6. DISPOSAL OF THE MACHINE

Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic 

Equipment and its implementation in accordance with national law, electrical equipment 

that has reached the end of its life must be collected separately and returned to an 

environmentally compatible recycling facility. As the owner of the equipment, you should 

get information on approved collection systems from our local representative.
By applying this European Directive you will improve the environment and human 

health!

7. ORDERING NUMBERS

C 100C 

 

6185410

C 100D 

 

6185413

16c  /10 m 

 

6185451

 

/25 m 

 

6185452

 

/50 m  

 

6185453

20 

/5 m 

- 25 mm² 

6184211

 

/10 m 

- 25 mm² 

6184212

21 

/5 m 

- 25 mm² 

6184201

 

/10 m 

- 25 mm² 

6184202

T110  Transport unit 

6185251

MASTER 2200/0530 – 9

© KEMPPI OY

Содержание MasterTig 2200













Отзывы: