Digital Connectivity Module (DCM)
Operating manual - EN
1. GENERAL
Kemppi's Digital Connectivity Module (DCM) is a small single-board computer connected directly to the welding power
source or wire feeder. Together with WeldEye App, it collects and synchronizes welding data and adds tools to the work-
flow management, for example, in the form of work orders and welding procedure specifications (WPS). The welding
data collected with DCM is synchronized with the WeldEye welding management software cloud via WeldEye App.
DCM uses wireless Bluetooth technology for communicating with the mobile device.
DCM and WeldEye App are a new alternative for Kemppi's Smart Reader device. It is compatible with the following
Kemppi welding equipment:
•
MasterMig 353, 355
•
X5 FastMig
•
FastMig KMS
•
FastMig Pulse
•
FastMig M
•
FastMig X
•
Kemparc
•
Kemparc Pulse
•
A7 MIG Welder.
DCM also supports non-Kemppi welding equipment through ARC Euro Adapter -CV, ARC Saw Adapter and ARC Univer-
sal Adapter -CV/-TIG.
Important notes
Read the instructions through carefully. For your own safety, and that of your working environment, pay particular atten-
tion to the safety instructions delivered with the equipment.
Items in the manual that require particular attention in order to minimize damage and harm are indicated with the
below symbols. Read these sections carefully and follow their instructions.
Note: Gives the user a useful piece of information.
Caution: Describes a situation that may result in damage to the equipment or system.
Warning: Describes a potentially dangerous situation. If not avoided, it will result in personal damage or fatal injury.
© Kemppi
3
1921370 / 2212