Kemppi 6136300, Руководство по эксплуатации

Страница: 16 / 22

FastMig MS 200, MS 300
14
EN
2.6 Panel MS 200 and MS 300 setup parameters
Normal MIG welding Setup -parameters
Name of parameter
Name on
display
Parameter
values
Factory
setting
Description
Pre Gas Time
PrG 0.0 – 9.9 s 0,0 s Pre gas time in seconds
Post Gas Time
PoG 0.0 – 9.9 s Aut Post gas time in seconds or automatically
according to welding current (Aut)
Creep Start Cr OFF, on OFF Switch creep start on or off.
Creep Start Level CrE 10 – 170% 50% Percentage of wire feed speed:
10% slowed start
100% = no creep start function
170% accelerated start
Start Power StA -9 ... +9 0 Strength of start pulse
Post Current Time PoC -9 ... +9 0 Post current
Arc Voltage
Ard OFF, on OFF on: Display shows arc voltage
OFF: Display shows pole voltage
Cable Length
CAb std, 5 – 80m std Cable loss is calculated for optimal arc
control and for the Arc Voltage display
Synergic MIG -welding SETUP -parameters
Name of parameter
Name on
display
Parameter
values
Factory
setting
Description
Pre Gas Time
PrG 0.0 – 9.9 s Syn Pre gas time in seconds or automatically
according to synergic welding program
(Syn)
Post Gas Time PoG 0.0 – 9.9 s Syn Post gas time in seconds or automatically
according to synergic welding program
(Syn)
Creep Start Cr OFF, on OFF Switch creep start on or off.
Creep Start Level
CrE 10 – 170% 50% Percentage of wire feed speed:
10% slowed start
100% = no creep start function
170% accelerated start
Hot Start Level
Hot -50 ... 75% 30% Percentage of welding power:
-50% cold and +75% hot
Hot Start 2T Time H2t 0.0 – 9.9 s 1.2 s The duration of the hot start in seconds in
2T mode
Crater Fill End Level CrL 10 – 250% 30% The welding power at the end of the crater
fill stage as a percentage of the welding
power preset value
Crater Fill Start Level
CrS 10 – 250% 30% The welding power at the beginning of
the crater fill stage as a percentage of the
welding power preset value
Crater Fill Time
CrT 0.0 – 9.9 s 2.0 s The duration of the crater fill stage in
seconds (only in 2T mode)
Wise Fusion On FUS OFF, on OFF
Switch Wise Fusion on/off (only in 1-MIG)
Wise Fusion Percent
FUP 10...60% 25%
Percentage of Wise Fusion (only in 1-MIG)
Wise Penetration On
PE OFF, on OFF
Switch Wise Penetration on/off (only in
1-MIG)
Penetration Level PEn -30 ... +30% 0%
Set the arc length where penetration
control begins (only in 1-MIG)
MiniLog On ML on, OFF OFF
Switch on/off MiniLog