Kemper PROFILER Remote, Быстрый старт

Страница: 8 / 132

8 PROFILER QUICKSTART
MAKING CONNECTIONS
Connect your guitar to the INPUT on the right side of the front
panel.
If you want to use headphones, plug them into the HEADPHONE
output on the left.
If you are going to play through a mixing desk, computer audio
interface or powered monitor speakers, then connect the
MAIN
OUTPUTS on the rear side (either XLR or TS) to the inputs of the
receiving device.
Don’t forget to connect the power cable to a power outlet. Don’t
be concerned about voltage - the PROFILER adapts automatically!
Power the unit on by turning the chicken-head knob to the
BROWSER position. Wait until the unit completes the boot
sequence, at which point the home screen of the Browser Mode
will appear.
Play your guitar. Control the volume of the PROFILER with the
MASTER VOLUME knob in the upper right half of the unit.
If you own a PROFILER Remote, then connect it to the NETWORK
socket using the Ethernet cable provided.
Input
Headphone
GROUND
LIFT
/ PEDAL NETWORK USB