Kemper PROFILER Remote, Быстрый старт

Страница: 13 / 132

13 PROFILER QUICKSTART
To assign (or unassign) one of the effect modules to an Effect
button:
»
Press and hold the button of the relevant effect module on
your PROFILER.
»
Press the Effect button on your Remote.
»
Release both buttons.
These Effect Button assignments are specific to each Rig, so you
must store the Rig to keep the changes you’ve made.
TUNER
You can check the tuning at any time by watching the three TUNER
LEDs, either on the PROFILER or the Remote.
Switch the chicken-head to the TUNER position or press the
TUNER button on your Remote to activate Tuner Mode.
Enable “Mute Signal” via corresponding soft button, if you prefer
the guitar input to be muted whenever Tuner Mode is activated.