- 1 -
Installation and operating instructions
KEMPER KHS timer Figure 686 03 006 for
KEMPER KHS hygiene flushing unit
Symbol Meaning
Indicates a direct risk potentially
resulting in death or serious bodily
harm.
Indicates important information.
Contents
1. Safety…………………………………………………. P. 1
2. Technical data……………………………………….. P. 1
3. Installation…………………………………………… P. 1
4. Service………………………………………………… P. 2
5. Operation…………………………………………….. P. 3
5.1 Operational controls……………………………… P. 3
5.2 Timer disyplay……………………………………... P. 3
Quick reference guide Programming
KEMPER KHS-Timer for Hygienic Flushing………….P. 4
5.3 Setting the timer………………………………….. P. 6
5.4. Setting the summer/winter time ………………. P. 7
6. Setting new switching times……………………….P. 8
7. Editing switching times……………………………. P. 9
8. Change switching times……………………………P. 10
9. Delete switching times……………………………..P.12
1. Safety
Target Group and Qualifications
This KEMPER product may only be installed by
correspondingly trained engineers in compliance with
the installation and safety instructions. KEMPER is
unable to accept any liability for inappropriate
installations performed by persons lacking the
relevant training.
Essential Safety Advice
When installing this KEMPER product, the following
safety instructions need to be complied with as a
matter of principle:
- Carefully read installation instructions before the
installation
- Keep installation instructions nearby during the
installation process for reference
- Do not use any product featuring visible flaws
- Do not modify or convert the product independently
- Ensure sufficient space and adequate lighting for the
installation process
3. Installation
Connecting the Timer
DANGER
Mains cable carries live current.
Touching its open contacts will result in an electric
shock.
- Expertly disconnect the mains supply before
connecting the timer
(1)
Connecting the timer to mains
230 - 240 V
50 - 60 Hz
230 - 240 V
50 - 60 Hz
230 - 240 V
50 - 60 Hz
230 - 240 V
50 - 60 Hz
The electrical connection between the timer and the
hygiene flushing unit will not be established until the
control unit is installed.
(2)
(3)
2. Technical data
Nominal voltage
230 V AC
Operating voltage
12 V DC
Digital output signal
12 V DC (active)
Protection
class II
Contact
If you have any queries or require technical
information, please contact Gebr. Kemper GmbH +
Co. KG or visit www.kemper-olpe.de
