K410068600001-00 08.2018
5
b)
Servo drive
Before installing the servodrive,
make sure the home position is set
(position indication is 0%).
Adjust servo drive
Setting the valve home position
Position indicator
Setscrew
The servo drive has 8 alignment steps that can be
aligned in 45° steps. To do that, select the
appropriate servo drive position, depending on
the amount of space.
1
Press the drive firmly onto the cone.
2
Put on servo drive
Home position:
Check that the home position of the valve is
closed.
Make sure the position indicator is vertical to
the pipe axis
3
Fixate the servo drive on the
valve
4
Fixate the servo drive using an 4 mm hexagonal
wrench (Allen key), tightening torque 7….9 Nm.
