K410068601001-00 08.2019
8
5
Directive CE-conformity servo drive
Figure 686 01 | 686 05
Applied standards
RoHS-Directive 2011/65/EU
Directive 2004/108/EG (2014/30/EU)
for the electromagnetic compatibility
Directive 2006/95/EG (2014/35/EU)
Low voltage directive
EN 50581
EN 60730-1
EN 60730-2-14
6
Maintenance
According to DIN EN 806 Part 5, the
operator has to
make an annual
inspection.
Removal of the head-part
Dismantle the servo drive in the reverse
sequence described in Point 3. Unscrew
the head part (A) from the housing (1)
with an SW 17 wrench and remove it.
Visually check the body and sealing
surfaces and replace as necessary.
Installation
Insert the head-part (A) into the housing
(1) and position at the limit stop. Tighten
the head-part with an SW 17 wrench
using 20 Nm torque. Install the servo
drive as described in Point 3.
7
Spare parts
Spare parts list
Figure 686
Position
Designation
Art.-No.
A
Head-part DN 15/20 E012068600020KP
B
Head-part DN 25
E012068600025KP
C
Head-part DN 32
E012068600032KP
A, B, C
1