Kelvinator KSV26CRC, Руководство пользователя, Страница: 9 / 18

Kelvinator Air Conditioning Features of the remote contol 5
In Heat mode
(1) When the initial temperature is set at 16°C, the air
conditioner will continue to run at this setting.
(2) When the initial temperature is set at between
17°C-20°C, after Sleep function is selected, the set
temperature will decrease 1°C at the end of the first
hour and continue to run at this setting.
(3) When the initial temperature is set between
21°C-27°C, after this Sleep function is selected,
the temperature will decrease 1°C in every hour,
after 2 hours the air conditioner will continue to
run at this setting.
(4) When the initial temperature is set between
28°C-30°C, after this Sleep function is selected
the temperature will decrease 1°C in every hour,
after 3 hours the air conditioner will continue to run
at this setting.
Sleep Mode 3
In this mode the sleep temperature curve is manually
set (DIY).
(1) After selecting Sleep mode 3, press and hold the
Turbo button until the remote control enters into
user defined sleep setting status. The remote control
will display "1 hour", temperature display will show
the corresponding temperature of last setting sleep
curve and blink (The first use will display the original
factory setting).
(2) Adjust " " and " " buttons will change the setting
temperature for the first hour of sleep, after
setting the temperature, press the Turbo button
for confirmation.
(3) The hour of sleep mode will be automatically
increased on the remote control, to the 2nd, 3rd hour
of sleep mode and so on with each press of the
Turbo button.
(4) Repeat the above step (2 )-(3) operation, until 8 hours
of sleep temperature setting is finished. The sleep
curve program is finished The remote control will
resume the original timer display. The temperature
display will return to the original setting.
The sleep program can be checked by selecting sleep
mode 3, pressing and holding the Turbo button and
then repeat pressing the turbo button to review the
sleep program temperatures without pressing the " "
or " " buttons. In this mode, if the no button were to
be pressed for 10 seconds, the display will revert to
normal operation.
10 I FEEL Button
Press this button once, to turn on the I FEEL
function, then the symbol of "I FEEL" will be displayed.
The air conditioner will then operate to reach the set
temperature at the location of the remote control.
After this function has started, the remote control will
send temperature to the main unit every 10 minutes.
Once the button has been pressed again, the function
will be cancelled.
11 QUIET Button
During operation press the Quiet button in order to use
the Quietest fan mode in AUTO, COOL, DRY, FAN or
HEAT mode.
12 SLEEP Button
Pressing this button to select sleep mode ( ),
sleep mode ( ), Sleep mode ( ) and cancel the
Sleep mode. Circulate between these modes after
the air conditioner is switched on.
Sleep mode 1
In Cool and Dry modes, the set temperature will
increase 1°C after an hour, after 2 hours the set
temperature will increase another 1°C, then continue to
run at this setting. In Heat mode: the set temperature
will decrease 1°C, after 2 hours the set temperature
will decrease another 1°C, then continue to run at
this setting.
Sleep mode 2
In this mode, the air conditioner will run according to a
preset sleep temperature curve.
In Cool mode
(1) When setting the initial temperature between
16-23°C, after turning on the Sleep function, the
temperature will increase 1°C every hour, after 3°C
the temperature will be maintained, after 7 hours, the
temperature will be decreased a further 1°C, after that
the unit will keep running at this temperature;
(2) When setting the initial temperature between
24°C-27°C, after turning on the Sleep function, the
temperature will increase 1°C in every hour, after 2°C
the temperature will be maintained, after 7 hours, the
temperature will be decreased a further 1°C, after
that the unit will keep running at this temperature;
(3) When setting the initial temperature between
28°C-29°C, after turning on the Sleep function, the
temperature will increase 1°C in the first hour, after
7 hours, the temperature will be decreased a further
1°C, after that the unit will keep running at this
temperature;
(4) When setting the initial temperature to 30°C, after 7
hours the temperature will be decreased 1°C, after
that the unit will keep running at this temperature.