Kelvinator KSV26CRC Скачать руководство пользователя страница 13

Kelvinator Air Conditioning 

Troubleshooting  9

Problem

Cause

Water leakage of 
outdoor unit

•  During cooling operation, water 

condensates around the pipes and 
connection joints.

•  During defrosting operation, thawed 

water flows out.

•  During heating operation, water on the 

heat exchanger drips out.

Noise from indoor 
unit.

•  The noise emitted when the fan or 

compressor relay is switched on or off.

•  When the defrosting operation

 

is started or stopped, there is a 
sound of refrigerant flowing in the 
reverse direction.

Indoor unit can not 
blow air

•  In HEAT mode, when the temperature

 

of indoor heat exchanger is very low, 
air flow is stopped in order to prevent 
cold air. (within 2 minutes)

•  In HEAT mode, when the outdoor 

temperature is low or humidity is high, 
frost will be formed on the outdoor 
heat exchanger. The unit will defrost 
automatically and indoor unit will stop 
blowing air for 3-12 minutes.

•  During defrosting operation, water or 

vapour may be emitted.

•  In DRY mode, the indoor fan will stop 

blowing air for 3-12 minutes in order 
to avoid condensing water being 
vaporised again.

Moisture on air 
outlet

•  If the unit operates at high humidity for a 

long time, moisture will be generated on 
the air outlet grill and then drip off.

H1: Defrosting

It is normal. The unit is in defrosting mode 
and heating will recommence soon.

E3: Low pressure 
warning

Your air conditioner has lost refrigerant. 
Contact your installer to check for 
potential leaks.

The pressure in the refrigeration system is low and could result 
in the unit breaking down. Ask a certified installer to control it.
If any one of the following situations occurs, immediately stop 
all operations, disconnect the power supply, and contact the 
authorised personnel.

•  There is a harsh sound during operation.
•  Strong odours are emitted during operation.
•  Water is leaking from the unit.
•  The circuit breaker often trips.
•  Water or other liquid is splashed into the unit.
•  Power cord and power plug is overheating.

The air conditioner is not user serviceable. Incorrect repair 
may cause electric shock or fire, so please contact an 
authorised service center for professional repair.
The following checks prior to contact may save you time 
and money.

Problem

Cause

The unit does not 
operate

The unit does not operate if it is 
turned on immediately after it is 
turned off. This is to protect the unit. 
You should wait about 3 minutes.

Odours are emitted

•  Some odours may be emitted 

from the indoor unit. This is the 
result of room smells (such as 
furniture,tobacco,etc.) which have 
been taken into the air conditioner.

•  Consult authorised service centre for 

cleaning if the odours persist.

"Water flowing" noise

The swishing noise like water flowing is 
the refrigerant flowing inside the unit.

Mist is emitted in 
COOL mode

During cooling operation, a thin mist 
may be seen emitted from the indoor 
unit due to high room temperature 
and humidity.
After a period of time, the mist will 
disappear as the decrease of room 
temperature and humidity decreases.

Cracking noise

This is the sound of friction caused 
by expansion and/or contraction of 
panel or other parts due to the change 
of temperature.

The unit can not be 
started up

• Is the power cut off?
•  Is the power plug loose?

 

(if applicable )

•  Is the circuit protection device 

tripped off?

•  Is voltage higher or lower? 

 

(Tested by professionals)

• Is the TIMER correctly used?

Cooling/Heating 
effect is poor

• Is temperature setting appropriate?
• Is the inlet or outlet blocked?
• Is the filter dirty?
• Is the window or the door open?
• Is low fan speed set?
• Are there heat sources in the room?

Remote control does 
not transmit signals

•  Check if there is magnetic or 

electrical interference near the unit 
that may affecting operation of the 
remote control. In this case, pull the 
plug out and reinsert it.

•  Is the remote control within its 

operating range or obstructed? 

Check the condition of the batteries 
and replace them if necessary.

•  Check if the remote control

 

is damaged.

Water leakage of 
indoor unit

• The humidity is high.
• Condensing water overflows.
• Drain hose is loose or obstructed.

Troubleshooting

Содержание KSV26CRC



















Отзывы: