Kelvinator KSV25HWJ, Руководство пользователя, Страница: 8 / 26

8
Buttons and Functions
Buttons and Functions
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote control. The following is a brief
introduction to the remote control itself. For instructions on how to operate your air conditioner, refer to the
How to Use Basic
Functions
section of this manual.
ON/OFF
SET
Turns the unit on or off.
CLEAN
LED
Turbo
SWING
TEMP
Starts and stops the horizontal
louver movement. Hold down
for 2 seconds to initiate vertical
louver auto swing feature.
Enables unit to reach preset
temperature in shortest possible
time.
Scrolls through operation
functions as follows:
The selected symbol will flash
on the display area, press the
OK button to confirm.
NOTE: "Fresh" mode is not
applicable to the models in
Australia.
Fresh( ) Follow Me( )
AP mode( ) Fresh...
Used to start/stop the Self Clean
function.
Used to restore the current
settings or resume previous
settings.
FAN SPEED
TEMP
Turns indoor unit’s LED display
and air conditioner buzzer on
and off (model dependent),
which create a comfortable and
quiet environment.
Selects fan speeds in the
following order:
AUTO LOW MED HIGH
NOTE: Holding this button down
for 2 seconds will activate Silence
feature.
MODE
Scrolls through operation modes
as follows:
AUTO COOL DRY HEAT FAN
NOTE: HEAT mode is not supported
by the cooling only appliance.
SLEEP
Saves energy during sleeping hours
OK
Used to confirm the selected functions
TIMER
Set timer to turn unit on or off
SHORTCUT
Model: RG10B(E)/BGEF
Increases temperature
in 1˚C(1˚F) increments.
Max. temperature is
30˚C(86˚F).
Decreases temperature
in 1˚C(1˚F) increments.
Min. temperature is
17˚C(62˚F).