Kelvinator KSV25HRD Скачать руководство пользователя страница 2

2

Contents

Congratulations and thank you for choosing our 

Inverter Speed 

Split room

 air conditioner. We are sure you will find  

your new air conditioner a pleasure to use. Before you use the air 
conditioner, we recommend that you read through  
the entire user manual, which provides the description of  
the air conditioner and its functions.

To avoid the risks that are always present when you use an electrical 
appliance, it is important that the air conditioner  
is installed correctly and that you read the safety instructions 
carefully to avoid misuse and hazards.

We recommend that you keep this instruction booklet  
for future reference and pass it on to any future owners.

After unpacking the air conditioner please check it is not damaged. 
If in doubt, do not use the air conditioner but  
contact your local Electrolux Customer Care Centre.

ENVIRONMENTAL TIPS

 environment

Information on disposal for users

•    Most of the packing materials are recyclable.  

Please dispose of those materials through your local recycling 
depot or by placing them in appropriate collection containers.

•    If you wish to discard this air conditioner, please contact your 

local authorities and ask for the correct method  
of disposal.

Conditions of use

This appliance is intended to be used in household and similar 
applications such as:

•    Staff kitchen areas in shops, offices and other working 

environments

•   Farm houses

•    By clients in hotels, motels, and other residential 

type environments

•   Bed and breakfast type environments

Contents  ...................................................................... 2

Safety precautions ....................................................... 3

Notice for installation .................................................. 4

Installation drawing ..................................................... 5

Installation of indoor unit ............................................. 6

Refrigerant pipe connection  ........................................ 8 

Installation of outdoor unit .......................................... 9

Check after installation and operation test ................ 10

Installation and Maintenance of HEPA Filter .............. 10

Warranty .................................................................... 11

Congratulations

Contents

Содержание KSV25HRD

















Отзывы: