9
Remote control features
In Heat mode
(1) When the initial temperature is set at 16°C, the air
conditioner will continue to run at this setting.
(2) When the initial temperature is set at between 17°C-20°C,
after Sleep function is selected, the set temperature will
decrease 1°C at the end of the first hour and continue to
run at this setting.
(3) When the initial temperature is set between
21°C-27°C, after this Sleep function is selected,
the temperature will decrease 1°C in every hour,
after 2 hours the air conditioner will continue to
run at this setting.
(4) When the initial temperature is set between
28°C-30°C, after this Sleep function is selected
the temperature will decrease 1°C in every hour,
after 3 hours the air conditioner will continue to run
at this setting.
Sleep Mode 3
In this mode the sleep temperature curve is manually
set (DIY).
(1) After selecting Sleep mode 3, press and hold the Turbo
button until the remote control enters into
user defined sleep setting status. The remote control
will display "1 hour", temperature display will show the
corresponding temperature of last setting sleep curve and
blink (The first use will display the original factory setting).
(2) Adjust " " and " " buttons will change the setting
temperature for the first hour of sleep, after
setting the temperature, press the Turbo button
for confirmation.
(3) The hour of sleep mode will be automatically increased on
the remote control, to the 2nd, 3rd hour of sleep mode and
so on with each press of the
Turbo button.
(4) Repeat the above step (2 )-(3) operation, until 8 hours of
sleep temperature setting is finished. The sleep curve
program is finished The remote control will resume the
original timer display. The temperature display will return to
the original setting.
The sleep program can be checked by selecting sleep mode 3,
pressing and holding the Turbo button and
then repeat pressing the turbo button to review the sleep
program temperatures without pressing the " " or " "
buttons. In this mode, if the no button were to
be pressed for 10 seconds, the display will revert to normal
operation.
10 I FEEL Button
Press this button once, to turn on the I FEEL
function, then the symbol of "I FEEL" will be displayed. The air
conditioner will then operate to reach the set temperature at
the location of the remote control.
After this function has started, the remote control will send
temperature to the main unit every 10 minutes.
Once the button has been pressed again, the function will be
cancelled.
11 QUIET Button
During operation press the Quiet button in order to use the
Quietest fan mode in AUTO, COOL, DRY, FAN or HEAT mode.
12 SLEEP Button
Pressing this button to select sleep mode ( ),
sleep mode ( ), Sleep mode ( ) and cancel the
Sleep mode. Circulate between these modes after
the air conditioner is switched on.
Sleep mode 1
In Cool and Dry modes, the set temperature will increase 1°C
after an hour, after 2 hours the set temperature will increase
another 1°C, then continue to run at this setting. In Heat mode:
the set temperature
will decrease 1°C, after 2 hours the set temperature
will decrease another 1°C, then continue to run at
this setting.
Sleep mode 2
In this mode, the air conditioner will run according to a preset
sleep temperature curve.
In Cool mode
(1) When setting the initial temperature between 16-23°C,
after turning on the Sleep function, the temperature will
increase 1°C every hour, after 3°C the temperature will
be maintained, after 7 hours, the temperature will be
decreased a further 1°C, after that the unit will keep running
at this temperature;
(2) When setting the initial temperature between 24°C-27°C,
after turning on the Sleep function, the temperature will
increase 1°C in every hour, after 2°C the temperature
will be maintained, after 7 hours, the temperature will be
decreased a further 1°C, after
that the unit will keep running at this temperature;
(3) When setting the initial temperature between 28°C-29°C,
after turning on the Sleep function, the temperature will
increase 1°C in the first hour, after 7 hours, the temperature
will be decreased a further 1°C, after that the unit will keep
running at this temperature;
(4) When setting the initial temperature to 30°C, after 7 hours
the temperature will be decreased 1°C, after that the unit
will keep running at this temperature.