Kelvinator KSV25HRD Скачать руководство пользователя страница 3

3

Safety

Safety precautions

Inside this manual you will find many helpful hints on how to use 
and maintain your air conditioner properly.

Just a little preventive care on your part can save you a great deal 
of time and money over the life of your air conditioner. You'll find 
many answers to common problems in the chart of troubleshooting 
tips on page 13. If you review the chart of troubleshooting tips first, 
you may not need to call for service.

Meanings of symbols used in this manual are shown below:

WARNING

caution

This indicates information concerning your personal safety and 

how to avoid damaging the appliance

TIPS & INFORMATION

 important

This symbol indicates tips and information about  

use of the appliance

ENVIRONMENTAL TIPS

 environment

This symbol indicates tips and information about economical and 

ecological use of the appliance

 This symbol indicates never to do this

 Always do this

Important notes:

 Do not operate unit with horizontal louvre in closed position.

Do not operate unit without the air filter.

WARNING

warning

If you notice an unusal situation, such as a burning 

smell, please switch off the power to the air 

conditioner and contact an Electrolux service agent.

If this abnormal status continues the air conditioner 
may be damaged or even cause electric shock or fire.

Do not operate the air conditioner with wet hands.

This may cause electric shock.

Do not damage or cut off the power cord or other 
wires. If this occurs, please have it repaired or 
replaced by an accredited technician. 

Do not connect this air conditioner to a multi 

outlet powerboard.

Please switch off the power supply to the air 

conditioner if it is not to be used for an 

extended period.

Otherwise, it will accumulate dust and may cause a fire.

Before cleaning the air conditioner, please 

disconnect the power supply in order to eliminate 

the possibility of electric shock.

The power supply should be matched with the air 

conditioner according to the installation manual. 

Air conditioners provided with a supply cord should 

be connected directly to a power outlet with a 

suitable safety switch. Air conditioners that are hard 

wired must be connected to a suitable safety circuit 

breaker according to the installation manual.

Please ensure that the power supply to the air 

conditioner is stable and meets the requirements set 

out in the installation manual.

Always ensure the product is installed with 

appropriate earthing.

 

For safety, be sure to turn off the circuit breaker 

before performing any maintenance or cleaning or 

when the product is not used for an extended 

period of time.

Accumulated dust may cause fire or electric shock.

WARNING

caution

Select the most appropriate temperature.

It can save electricity.

Do not keep windows and doors open for a long 

time during operation.

It will result in insufficient performance.

Do not block the air inlet or outlet.

It will result in insufficient performance and cause 
malfunctions.

Keep combustible materials away from the units at 

least 1m.

It may cause fire.

Do not step on the top of the outdoor unit or place 

heavy things on it.

It may cause damage or injury.

 

Do not attempt to repair the air conditioner yourself.

Incorrect repairs may cause electric shock or fire.
Please contact your local authorised service centre.

Do not insert your hands or objects into the air inlet 

or outlet.

It may cause injury.

Do not expose animals or plants directly to the air 

flow.

Do not use the unit for any other purpose, such as 

preserving food or drying clothes.

Do not splash water on the air conditioner.

It may cause electric shock or malfunction.

Содержание KSV25HRD

















Отзывы: