Kelvinator KCHST27.8, Руководство по обслуживанию, установке и уходу

Страница: 4 / 30

Service and Installation Manual
4
CONTENTS
RECEIVING & INSPECTING EQUIPMENTGGGGGGGGGGGGGGG..GGGGGGG4
SPECIFICATIONSGGGGGGGGGGGGGGGGGGGG.GGGGGGGGG.GGG5
INSTALLATIONGGGGGGGGGGGGGGGGGGGGGGGGGGGG.GGGG..G.6
OPERATIONGGG..GGGGGGGGGGGGGGGGGGGGGGGGGG..GGGGG7
MAINTENANCEGGGGGGGGGGGGGGGGGGGGGGGGGGG.GGGGGG.9
WIRING DIAGRAMGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG11
All rights reserved. Reproduction without written permission is prohibited.
SERIAL NUMBER INFORMATION
The serial number of all self-contained refrigerators and freezers is located inside the unit on the left hand
side near the top on the wall.
Always have the serial number of your unit available when calling for parts or service.
This manual covers standard units only.
RECEIVING AND INSPECTING THE EQUIPMENT
Even though most equipment is shipped crated, care should be taken during unloading so the equipment is not
damaged while being moved into the building.
1. Visually inspect the exterior of the package and skid or container. Any damage should be noted and reported
to the delivering carrier immediately.
2. If damaged, open and inspect the contents with the carrier.
3. In the event that the exterior is not damaged, yet upon opening, there is concealed damage to the equipment,
notify the carrier. Notification should be made verbally as well as in written form.
4. Request an inspection by the shipping company of the damaged equipment. This should be done within 10
days from receipt of the equipment.
5. Be certain to check the compressor compartment housing and visually inspect the refrigeration package. Be
sure lines are secure and base is still intact.
6. Freight carriers can supply the necessary damage forms upon request.
7. Retain all crating material until an inspection has been made or waived.