Kelvinator 10DF-13, Руководство по обслуживанию и установке

Страница: 8 / 40

Defrosting Instructions
A drain fitting is located in the bottom of the storage
tank. To drain the defrost water:
1. Remove and store products in another freezer.
2. Loosen and remove any items such as ice cream,
nuts, berries, paper labels, etc., which could plug the
bottom drain.
3. Remove the cap from the drain hose fitting.
4. Connect a hose to the fitting and run it to a floor drain,
a shallow (2" high maximum) pan, or to a “Filordrain”
at the sink.
5. Disconnect the cabinet by pulling the plug or turning
the thermostat off to melt down the frost.You can has-
ten the defrost by using the “Filordrain” or a hose to
spray warm water on the cabinet walls. (Detailed
instructions for using the “Filordrain” for spraying the
frost and removing the accumulated water are avail-
able from your dealer.)
6. Recap hose fitting after defrosting is complete.
6 GROUNDING INSTRUCTIONS
COMPRESSOR COMPARTMENT
DRAIN IN LINER
DRAIN CAP