3. Insert the hook located on the black webbing at the
top corner of the CarTarp to the ferrel on the end of
the top pole (Fig. 3A and 3B).
Repeat for the other hook
and end.
SETTING UP YOUR CARTARP
2. Spread the CarTarp body on the ground. Lay the top
pole (with the hook and loop straps) parallel to the
top of the CarTarp (figure 2).
Figure 1A
Figure 1B
Figure 1C
1. Assemble all the poles manually (figures 1A,
1B and 1C).
DO NOT allow the shockcord snap the pole
sections together, this can damage the poles.
Figure 2
6
PITCHING
INSTRUCTIONS
Figure 3A
Figure 3B
