Kelso KCM65, Руководство по эксплуатации продукта, Страница: 15 / 21

13
SERVICE AND MAINTENANCE
b) Use a wrench or socket to adjust the vertical tensioner
bolt beneath the motor mount. (Figure 9 - B)
c) Adjust the motor mount position up or down as required.
Clockwise lowers the motor mount, increasing belt
tension. Anti-clockwise raises the motor mount to
decrease belt tension.
d) Make sure that the V-belt tension is correct and
re-tighten the 4 bolts.
7) If the V-belt pulleys are mis-aligned, do these steps:
a) Remove the motor cover.
(Figure 10)
b) Loosen the 4 bolts that hold the motor to the motor mount.
(Figure 11 - A)
c) Adjust the motor position forwards or backwards.
(Figure 12)
d) Make sure that the V-belt pulleys align and tighten the
4 bolts.
8) Install the V-belt inspection cover.
HOW TO ADJUST GEAR ENGAGEMENT
WARNING!
Do not operate the product without the safety guard
installed.
NOTE:
Incorrect gear engagement will result in early wear of
gear components.
Correct gear engagement is achieved when the teeth of the bowl
and the teeth of the pinion are 2/3 engaged upon contact.
(Figure 13)
Adjustments can be made by moving the washers to the upper
or lower position on the bowl shaft. (Figure 14 - A)
FIGURE 9
FIGURE 10
FIGURE 11
FIGURE 12
FIGURE 13
FIGURE 14
B
A
A
A