NOTE:
Au GOLD FINDER
may produce similar responses when detecting over
significantly changing ground mineralization, hot rocks or targets. In order to identify a
target response, simply sweep the search coil over the target location. If the response
dissipates, fluctuates or changes, detector is likely responding to changing ground
conditions (mineralization or hot rocks). If the detected response remains constant, it is
likely a quality target and worth investigating (digging).
IMPORTANT:
Ensure that TRACKING is turned off when conducting air tests. Failure to turn
off TRACKING during air testing will result in detector continually performing GROUND
BALANCE sequence during air test and result in significant depth loss as you resume
detecting.
Important Details Concerning Ground Balance
GROUND BALANCE
Automatic GROUND BALANCE may fail to sequence in the following conditions:
- Metal under search coil when attempting Automatic GROUND BALANCE;
- Ground is too conductive;
- Ground mineralization is too low.
Should Automatic GROUND BALANCE sequence fail to complete, please do the following:
- Change GROUND BALANCE location, repeat Automatic GROUND BALANCE sequence;
- Change to Manual GROUND BALANCE if changing location does not allow Automatic
GROUND BALANCE sequence to successfully complete;
Should Automatic and Manual GROUND BALANCE attempts fail, continue detecting
without GROUND BALANCE as follows:
- Restart
Au GOLD FINDER
;
- Sweep search coil over ground listening carefully for changes in tone as you
sweep;
- If you hear a sound as you sweep coil over the ground, switch
Au GOLD FINDER
to either DISC.1 FAST or DISC.2 DEEP;
- Adjust DISC.FILTER gradually while sweeping coil to eliminate any sound;
- Once sound has been eliminated, proceed to use
Au GOLD FINDER
.
- GROUND BALANCE will remain stable and does not require adjustment once successfully
attained (Automatic or Manual).
NOTE:
DISC FILTER is not active when ALL METAL mode is selected;
Page 14
Содержание GOLD FINDER
Страница 1: ...USER MANUAL ...
