Kelly KLS84150RMO, Руководство пользователя

Страница: 7 / 37

Kelly Jaguar series KLS-N Sinusoidal Brushless PM Motor Controller User
’s Manual
V2.9
6
Kelly KLS-RMO------Opto-isolated Racing Motor controllers
Model Nominal
Voltage
Max
Operating
Voltage
Boost
Current
30 seconds
Continuous
Current
Continuous Current
(liquid cooling)
KLS84150RMO 48-84V 36-100V 1500A 375A 600A
KLS84180RMO 48-84V 36-100V 1800A 450A 720A
KLS1170RMO 48-110V 36-132V 700A 175A 280A
KLS1185RMO 48-110V 36-132V 850A 210A 340A
KLS11100RMO 48-110V 36-132V 1000A 250A 400A
KLS11130RMO 48-110V 36-132V 1300A 325A 520A
KLS11160RMO 48-110V 36-132V 1600A 400A 640A
KLS1460RMO 48-144V 36-173V 600A 150A 240A
KLS1480RMO 48-144V 36-173V 800A 200A 320A
KLS14100RMO 48-144V 36-173V 1000A 250A 400A
KLS14120RMO 48-144V 36-173V 1200A 300A 480A
KLS1680RMO 48-168V 36-200V 800A 200A 320A
KLS16100RMO 48-168V 36-200V 1000A 250A 400A
Chapter 3 Wiring and Installation
3.1 Mounting the Controller
The controller can be oriented in any position which should be as clean and dry as possible,
and if necessary, shielded with a cover to protect it from water and contaminants.
To ensure full rated output power, the controller should be fastened to a clean, flat metal
surface with four screws. Applying silicon grease or some other thermal conductive material to
contact surface will enhance thermal performance.
Proper heat sinking and airflow are vital to achieve the full power capability of the controller.
The case outline and mounting holes
’ dimensions are shown below.