Kellfri 35-WKL220 Скачать руководство пользователя страница 10

Страница: 10 / 36

Table of Contents

RISKS AND HAZARDS ASSOCIATED WITH THE USE OF GRASSLAND MACHINERY

Risk of crushing

Observers can be injured when the machine is lowered in the cutting position. Pasture toppers

have crushing points around the hinge areas and between the 3-point linkage and the main body.

Respect the risk zone of 15 m!

Rotating blades

WARNING! Any person can risk injury by putting their hands or feet under the machine when it is

lifted from the ground and the blades are still rotating. Nobody is allowed in the vicinity during

operation or when the machine is running.

Risk of crushing

This risk is common in mechanical transmission devices such as belt drives, bevel gears and rollers.

Ensure that all guards are correctly fitted.

Rotating blades

Risk when disengaging machine

The heavier a rotating part is, the longer it will continue to rotate after the wheel drive

has been disconnected. This property is called free-wheeling. Rotating blades and other components

such as drive shafts etc. will continue to spin round after the wheel drive has been disconnected.

Injuries occur:

•

When the operator disconnects the equipment and attempts to clean or adjust the machine

before the components have stopped rotating.

•

When the shear bolt in the protective device in the power outlet disintegrates and the ro-

tors continue to spin while the power outlet has stopped. The operator’s awareness is of key

importance for safety around rotating parts. Never raise the machine while the blades are still

rotating!

Risk of ejected objects

Machines that cut grass eject material during operation. Foreign objects such as stones, sticks and

other debris can find their way under the machine and be ejected at great speed. Metal guards

at the sides and front prevent these objects being ejected, but this is no guarantee that they will

always capture everything.

Observers or animals standing in the way of an ejected object can suffer serious

injury. Never operate the machine when there are observers nearby.

Respect the

equipment’s risk zone of 15-25 m!

Noise

Note that the machine is intended for outdoor use and that the operator’s position is the driver’s

seat of the tractor. It is advisable to read the directions given in the tractor manual and maintenance

instructions. The sound pressure level during operation exceeds 70 dB. Hearing protection must

therefore be worn during operation.

Accidents involving slipping and falling are often a result of:

•

Slippery surface

•

Uneven steps and work platforms.

The risk of slips and falls can be reduced considerably by exercising good judgement.

Содержание 35-WKL220





































Результаты поиска

Содержание 35-WKL220

Отзывы:

Похожие инструкции для 35-WKL220

Бренды по названию

Популярные бренды

Kellfri 35-WKL220, Руководство пользователя

Результаты поиска

Содержание 35-WKL220

Отзывы:

Похожие инструкции для 35-WKL220

Бренды по названию

Популярные бренды