Kellfri 35-SKL145, Руководство пользователя

Страница: 6 / 24

6
Table of contents >>
SAFETY TRAINING
Safety is a primary concern in the design and manufacture of our products. Unfortunately, our efforts to
provide safe equipment can be wiped out by a single careless act of an operator or bystander. In addi-
tion to the design and configuration of equipment, hazard control and accident prevention are depen-
dent upon the awareness, concern, prudence and proper training of personnel involved in the operation,
transport, maintenance and storage of this equipment. It is the operator’s responsibility to read and un-
derstand ALL Safety and Using instructions in the manual and to follow these. Accidents can be avoided.
Working with unfamiliar equipment can lead to careless injuries. Read this manual before assembly or us-
ing, to acquaint yourself with the machine. If this machine is used by any person other than yourself, or is
loaned or rented, it is the machine owner’s responsibility to make certain that the operator, prior to using:
a. Read and understand the operator’s manuals.
b.
Is instructed in safe and proper use.
Never use a equipment or product with defect safety equipment.
Warning!
DANGER!
CAREFUL!
N.B!
Warning lables identify important safety aspects in this manual to help you and others avoid hazards and ac-
cidents. When using the machine: Take extreme caution!
WARNING!
This symbol indicates that a serious accident will occur if the instructions in the manual are not followed.
The accident leads to serious injury, possibly death or serious property damage.
This symbol indicates that an accident will occur if the instructions in the manual are not followed. The
accident leading to serious injury or property damage.
This symbol indicates that an accident may occur if the regulations are not followed. The accident results
in personal injury or property damage.
N.B! indicates the potential of failure if the regulation is not followed.
When using the machine at a company, the employer is responsible that the user of the machine
has theoretical and practical knowledge of the machine and that the work is carried out in a safe
manner.
AFTER USE
• When disconnecting the machine/unit, use support legs or mechanical locks if necessary
• Make sure the machine/ unit is parked on a flat surface when disconnecting.
• If the machine/unit is to be parked on an inclined surface, use suitable brake blocks and make sure it
cannot roll or tipp over
• Before disconnecting the hydraulic hoses, make sure there is no pressure left in the system.
• To prolong the life of your machine, do not leave it uncovered outside. Store underneath a cover prefer-
ably underneath a roof.
• Clean the machine - flush with water if needed.