14
LONG TIME STORAGE:
Before the storage, be sure to follow the below
•
Drain the engine on or add a stabilizer in the fuel to prevent fuel becomes messy.
•
If you have added stabilizer, run the engine for about 5 minutes ..
•
Turn off the engine.
•
Pull the lever back and forth to release the hydraulic pressure.
•
Remove the spark plug.
•
Pour ca. one tsp (teaspoon) of oil into the spark plug hole. Cover the hole with a cloth and
turn the engine a few times to lubricate the cylinders.
•
Replace the spark plug.
•
Never store the machine where there is a risk of fire. Allow the engine to swallow before
storage.
RECYCLING
Disposal of the product, disassemble and transport to the municipality’s recycling station.
Contact your local authority for further information
TROUBLE SHOOTING
MEASURE
Mower cuts unevenly or poorly
Check that the blades are undamaged and secured properly.
Check and tighten any straps.
The cutting sound changes.
Check knives.
Check the tension of drive belts.
Check the blade shafts and bearings
Vibrations
Check knives
Oil overheats
•
dirty oil.
•
The inlet filter is clogged.
•
Safety valve is incorrectly set.
•
Engine runs too fast.
•
Unskilled driving, causes excessive oil flow
valves.
•
broken oil pipeline.
•
Wrong type of oil in hot hot weather.
•
Change the oil and oil filter.
•
Cleaning the filter element.
•
adjust the valve.
•
Lower the speed.
•
Learn correct and smooth driving.
•
Replace broken wires.
•
Use the recommended oil.
