10
TRANSPORT AND STORING
Make sure there are no people, children and foreign objects around the area before transport-
ing the machine. Always take an extra caution during the transport. Ensure that the product
is well secured and that transport brackets are mounted. Always place the load as low as pos-
sible. Respect the danger zone even during transport. When lifting the equipment, never go
underneath suspended loads. Trailer used for transport should have working brakes.
Always store the machine in a dry place preferably underneath a cover when not in use. En-
sure that the product is stable and not likely to tip over. Never let children play where the
machine is being stored. Always keep in mind the risk of tipping!
TRANSPORT MODE
When the mower is moved from one job site to another, it is appropriate to raise the equip-
ment to the highest position(see section about cutting height). The engine must be turned
off and the blades stopped before adjusting to the transport position may be made. Remove
all loose dirt such as grass etc. from the cutter before leaving the field. Never move from one
place to another with the engine running. Please take into consideration that the mower is
not legal on public roads, it must not be used on public roads. Maximum speed when towing
is 15km / h.
MAINTENANCE AND SERVICE
•
Make sure the equipment is stable and not likely to tip over during maintenance and
service.
•
Replace damaged and worn parts immediately to reduce the risk of injury.
•
Perform maintenance, servicing and inspections as recommended. Use only parts with
equivalent performance to reduce the risk of damage and failure.
For spare parts: contact Kellfri Service
Check all bolts and nuts are tightened after maintenance and service. Always test the machine
before work is started.
•
Regularly check the condition of the equipment before the failure is a fact. Discovered
cracks, twistings, bendings, glitches or fatigue stop work and fix the problem. Worn parts
are to be exchanged.
•
Tighten all screws and nuts after a few hours of driving, and after a day at every runtime.
•
Disconnect the equipment from the towing vehicle when it is being repaired.
•
Lubricate moving parts regularly. For maintenance of the engine, see the separate engine
manual.
INSPECTION
It is very important to regularly check the machine, in order to detect and prevent wear and
tear, damage, etc
