background image

12

Table of Contents

WARNING DECALS

Make sure warning decals are always visible and clean them when necessary. Do not use a high-

pressure washer directly on the warning decal. If a part with a decal is replaced, or the decal  

becomes worn or in any other way unusable, order a new set of decals.

SYMBOL

EXPLANATION

Read the operating manual! Before carrying out work.

WARNING! Rotating machine parts. 
WARNING! The blades continue to rotate for a while after  
the product has been switched off.
WARNING Crushing risk! Never use the machine without all 
guards correctly mounted. Do not put your hand or any other 
part of your body into the machine while it is running. 
DANGER! Risk of entrapment in the rotating PTO shaft. 
Ejection warning!
Respect the equipment's risk zone!
Risk zone 25 m around the machine.

WARNING! Risk of crushing!
There must be no one standing behind the tractor/towing 
vehicle while the machine/equipment is being attached  
or detached.
The machine is for individual work only. Nobody is allowed  
in the vicinity during operation.
- Lubrication
- Tighten all bolts, nuts and couplings before use. 

Warning! Keep off the machine! 

Warning! Accident risk for children!
Children are not allowed in the vicinity of the machine.

Always store the product on a dry surface, preferably under  
a roof, when not in use.

The product is CE marked

Product name:

Type:

Weight:

Year of manufacture:

Serial no.:

2006/42/EC

Содержание 35-FDM240

















































Отзывы: