background image

5

PERSONAL PROTECTIVE EQUIPMENT

Wear suitable clothing and footwear. Do not wear loose clothing or jewelry when working with 
the equipment. Remember to put up long hair when working with equipment that rotates.

SURROUNDINGS

Check and make sure that the area is clear of people, children and objects before switching on 

or using the equipment. Risk of serious personal injury. 

Be especially careful if children are in the area where the equipment is being use or stored. 

Check that there are no low-hanging power lines within the work area. Be careful when work-

ing on slopes and near ditches.

Always work alone with equipment designed for single - purpose tools/products. Never have 

junk/debris lying in your work area. Have work spaces clean. Always respect the risk zone.

DANGER!

Children in the area should be supervised.

BEFORE USING

Read the instruction manual carefully. Be sure that you understand the safety information, in-

struction manual and warning labels. Use common sense when using and use the appropriate 

personal protective equipment.

Always check the performance of the machine combination to be used. Importantly, these 

harmonize and match in a satisfactory manner. This is to ensure the implement function and 

your and others’ safety.

Visually inspect the gear or the product before use. Fix or replace damaged and worn parts 

immediately to reduce the risk of injury. Lubricate moving parts and check that all screw-nuts 

and bolts are tightened. Clearing when necessary.

Learn and remember the correct working methods.  Beginners should always keep a low 

speed, use extreme caution before routine and product knowledge is achieved. The user/cus-

tomer is responsible to handle the situation correctly. The product should not be taken into 

use unless it can be done in a safe way for the user.

Содержание 28-RBH

















Отзывы: