Kelley HK страница 62 Скачать руководство пользователя

Страница: 62 / 64

6004754F — HK and HK-S Hydraulic Dock Leveler, 3 Button — Safe

Frame

™

January 2009

LiMiTeD warranTy, MoDeL Hk

Base Limited Warranty: KELLEY warrants that this DOCK LEVELER will be free from defects in material and workmanship

under normal use for a period of one (1) year from the earlier of 1) 60 days after the date of initial shipment by KELLEy, or

2) the date of installation of the DOCK LEVELER by the original purchaser, provided that the owner maintains and operates

the DOCK LEVELER in accordance with this Owner's Manual.

hydraulic Limited Warranty: All hydraulic power units and cylinders for this dock leveler are warranted to cover the cost of

replacement parts only for an extended period of four (4) years beyond the base warranty period.

The LIP hINGE for this DOCK LEVELER is warranted for the rated lifetime of the DOCK LEVELER provided that the

LIP hINGE is maintained per this Owner’s Manual. The rated lifetime of the DOCK LEVELER shall be determined by the

KELLEY DOCK LEVELER LIfE RATING sYsTEM, publication number 10-768, available from KELLEY upon request.

In the event that this DOCK LEVELER or LIP hINGE prove defective in material or workmanship within the applicable

warranty period, KELLEy will, at its option:

1. Replace the DOCK LEVELER or LIP hINGE, or the defective portion of either, without charge to the owner; or

2. Alter or repair the DOCK LEVELER or LIP hINGE, on site or elsewhere, without charge to the owner.

The limited warranty stated in the preceding paragraph Is EXCLUsIVE AND IT Is IN LIEU Of ANY OThER GUARANTEEs

AND WARRANTIEs, EXPREss OR IMPLIED. The warranty does not cover any failure caused by improper installation,

abuse, negligence, or failure to maintain and adjust the DOCK LEVELER properly. Parts requiring replacement due to

damage resulting from vehicle impact, abuse, or improper operation are not covered by this warranty. Kelley disclaims any

responsibility or liability for any loss or damage (including, without limitation, direct, indirect or consequential damages, or

lost profits or production time) that results from the use of unauthorized replacement parts or modification of the DOCK

LEVELER. KELLEY sole obligation with regard to a DOCK LEVELER that proves to be defective in material or workmanship

shall be as set forth in its standard warranty above (i.e., KELLEY will, at its option, repair or replace the DOCK LEVELER or

portion thereof, without charge to the purchaser.).

This limited warranty does not cover any failure caused by improper installation, abuse, negligence, or failure to properly

maintain and adjust the DOCK LEVELER. This limited warranty will be void or of no effect if the original purchaser does

not notify Kelley's warranty department within ninety (90) days after the product defect is discovered. Parts requiring

replacement due to damage resulting from vehicle impact, abuse, or improper operation are not covered by this warranty.

KELLEy disclaims any responsibility or liability for any loss or damage that results from the use of unauthorized replacement

parts or modification of the DOCK LEVELER. ThERE ARE NO WARRANTIEs, EXPREss OR IMPLIED, WhICh EXTEND

BEYOND ThE DEsCRIPTION ON ThE fACE hEREOf, AND ThERE Is NO WARRANTY Of MERChANTABILITY OR Of

fITNEss fOR A PARTICULAR PURPOsE.

KELLEY limited warranties extend only to the DOCK LEVELER itself.

KELLEY DIsCLAIMs all warranties, express or implied, responsibility or liability for loss or damage of any kind

associated with the installation or maintenance of the dock leveler, including any liability for premature product wear, product

failure, property damage or bodily injury arising from improper installation or maintenance of the DOCK LEVELER.

Содержание HK

































































Результаты поиска

Содержание HK

Отзывы:

Похожие инструкции для HK

Бренды по названию

Популярные бренды

Kelley HK, Руководство пользователя

Результаты поиска

Содержание HK

Отзывы:

Похожие инструкции для HK

Бренды по названию

Популярные бренды