©2014 4Front Engineered Solutions, Inc.
26
6004753N — Hydraulic Dock Leveler - One Button Control — Safe
T
Frame
™
March 2014
sTanDarD oPeraTion
Dock level
supports
Fig. 24
Fig. 25
Fig. 26
Do not operate the dock leveler when anyone is on or in
front of it.
Stay clear of the dock leveler when it is moving.
Do not walk on dock leveler or lip until the lip is fully
extended and supported by the vehicle bed.
Never use a fork truck or other material handling
equipment to lower the ramp and lip sections.
1. Do not operate the dock leveler until a vehicle is in
position against the dock bumpers.
2. Tell vehicle driver “your vehicle must stay at the dock.”
3. Chock or hitch vehicle.
4. If necessary, remove end loads with the ramp in the
dock level (stored) position. See Fig. 24.
noTe:
If the vehicle to be serviced is below dock level, see operating
instructions for Below Dock Control (BDC) on page 27.
5. To extend the dock leveler lip into the vehicle:
5.1 Push and hold the
raise
button. The ramp will
rise and the lip will extend once the ramp reaches
the highest position. See Fig. 25.
5.2 Release the
raise
button once the lip is fully
extended.
5.3 Ramp and lip will lower until the lip rests on the
vehicle bed. See Fig. 26.
6. Proceed with loading or unloading.
