ATTENTION!
Make sure that your motorcycle
is standing firmly before you start work, as a fall
may lead to damage to the motorcycle or injury
to you or others.
Dismantle the original indicators, rear and brake
light. Mount the Jetstream® DF in place of the ori-
ginal indicators, or drill a max. 8.5 mm diameter
hole and fasten the Jetstream® DF at 8 Nm with
the self-locking M8 nut supplied. Make sure that
the surface under your Jetstream® DF where the
wires will emerge is protected from splash water.
Mount the Jetstream® DF in such a way that the
beams run horizontally in your motorcycle’s di-
rection of travel.
Alignment is important to safety in traffic and es-
sential to your motorcycle’s roadworthiness, as a
motorcycle with incorrectly aligned lights is easy
to overlook on the road.
Make sure that you keep the following measures
in selecting your fastening point:
Jetstream® DF | rear | C = 116 mm
C
rear
mounting
surface
INSTALLATION
ELECTRICAL CONNECTION
Refer to the ECE-R 48/ECE-R 53 guideline avai-
lable at
https://unece.org/
for further mounting
regulations.
page 3
