ATTENTION!
Make sure that your motorcycle
is standing firmly before you start work, as a fall
may lead to damage to the motorcycle or injury
to you or others.
Dismantle the original indicators. Mount the
Jetstream® in place of the original indicators, or
drill a max. 8.5 mm diameter hole and fasten the
Jetstream® at 8 Nm with the self-locking M8 nut
supplied. Make sure that the surface under your
Jetstream® where the wires will emerge is pro-
tected from splash water. Mount the Jetstream®
in such a way that the beams run horizontally in
your motorcycle’s direction of travel.
Alignment is important to safety in traffic and es-
sential to your motorcycle’s roadworthiness, as a
motorcycle with incorrectly aligned lights is easy
to overlook on the road.
Make sure that you keep the following measures
in selecting your fastening point:
Jetstream® | front | A = 194 mm
Jetstream® | front | B = 17 mm
Jetstream® | rear | C = 134 mm
WARNINGS
INSTALLATION
C
deutsch
A
B
front
rear
Edge of
the illuminating
surface of the
headlamp
mounting
surface
mounting
surface
Refer to the ECE-R 48/ECE-R 53 guideline
available at
https://unece.org/
for further
mounting regulations.
page 3
