Keller HP Series, Руководство пользователя, Страница: 8 / 24

5
m
ano
-m
ode
The M
ano
-Mode is the standard mode of the ca-
librator. In this mode, the calibrator shows on
the upper display the actual pressure generated.
The smaller displays below indicate the peak-
and trough values. The measured values on the
smaller displays always appear with a reduced
resolution. Activating e
xe
resets the peak- and
trough values, meaning that they are reset to the
actual pressure.
Full-Version only: If a transmitter is connected,
the display automatically indicates the value
of the transmitter in mA or V on the lower left
display. The lower right display shows the tem-
perature.
Pressing the H
old
-Key (H-Key) freezes the
measured values. The actual pressure is now
shown on the lower right display. Pressing the
H-Key again leads back into the M
ano
-Mode
with the peak- and trough values reset to the
actual pressure (same as e
xe
).
m
ano
-m
ode
d
isPlay WitHout
t
ransMitter
= Is being read as a “1” between 100 bar and 200 bar when displaying with increased resolution --> 133.41 bar
Actual
Pressure
Trough Peak
A
cti
vate E
xE
Actual
Pressure
Trough Peak
Press H-Key
H
old
-m
ode
Frozen
Value
Actual Pressure Peak
With H-Key back to
M
Ano
-Mode
m
ano
-m
ode
d
isPlay WitH
t
ransMitter (Full-Version only)
Actual
Pressure
Temperature of
the Reference-
Sensor
Signal of
Transmitter
Press H-Key
H
old
-m
ode
Frozen
Value
Actual
Pressure
Frozen Value
of Transmitter