Chapter 2
INSTALLATION
INSTALLATION
2 - 1
2.1 OVERVIEW
This chapter describes how to install the SSIO-24. It details how to select
a source of power and the ports to be used. Figure 2-1 shows the loca-
tion of the Port Direction Switch, in addition to the Terminal Block used
to select the power source.
Figure 2-1. Component locations
2.2 TERMINAL BLOCK TB7
The SSIO-24 draws power from the PC, from an external source, or from
a combination of the two. Factory con
Þ
guration sets the Board for
power from the PC. To con
Þ
gure the power setting, use one of the fol-
lowing procedures.
Setting For PC Power
NOTE:
Do not use the PC power setting if the control signals come
from a KPCMCIA-PIO24 module.
