![background image](http://html1.mh-extra.com/html/keithley/sourcemeter-2600-series/sourcemeter-2600-series_reference-manual_4098633099.webp)
Series 2600 System SourceMeters Reference Manual TSP Programming Fundamentals 2-47
Return to
2600S-901-01 Rev. A / May 2006
After adding a name to the User menu, the script can then be run from the front
panel as follows:
1. Press the LOAD key.
2.
Select
User.
3. Select the user script to run and press the RUN key.
Modifying a user script
A user script stored in non-volatile memory can be modified by retrieving the script
listing for the script. The retrieved script can then be modified, loaded and saved
in non-volatile memory. See “
Retrieving a user script listing
” (below) for details.
Script management
Retrieving a user script listing
The listing for a user script can be retrieved from non-volatile memory. The listed
script can then be modified and saved as a user script under the same name or a
new name.
The following command returns a catalog listing of the user scripts stored in the
Series 2600:
script.user.catalog
()
Example:
Retrieve the catalog listing for user scripts:
for name in script.user.catalog() do
print (name)
end
NOTE
If using the Test Script Builder to modify a user script
stored in non-volatile memory, the script listing
should be retrieved from in the Project Navigator
(see “
Retrieving scripts from the Series 2600
described earlier in Section 2).
NOTE
A modified user script can be loaded back into the
Series 2600 using the same name or a new name.
Содержание SourceMeter 2600 Series
Страница 507: ...AppendixA Specifications Appendix A topics Model 2600S Specifications page A 2 2600S 901 01 Rev A May 2006...
Страница 575: ...AppendixF DisplayCharacterCodes Appendix F topics Introduction page F 2...
Страница 592: ......
Страница 593: ......