5-10 Sweep Operation
Series 2600 System SourceMeters Reference Manual
2600S-901-01 Rev. A / May 2006
Return to
Pulse sweep functions
Functions for pulse sweeps are listed in
Table 5-3
Pulse sweep functions
Function
Description
PulseIMeasureV(smu, bias, level, ton, toff, points)
smu
bias
level
ton
toff
points
Define fixed source current pulse sweep:
Smu: smua for channel A or smub for channel B.
DC bias current level in amps.
On source value of the pulse in amps.
Pulse on time in seconds.
Pulse off time in seconds.
Number of pulse-measure cycles.
PulseVMeasureI(smu, bias, level, ton, toff, points)
channel
bias
level
ton
toff
points
Define fixed source voltage pulse sweep:
Smu: smua for channel A or smub for channel B.
DC bias voltage level in volts.
On source value of the pulse in volts.
Pulse on time in seconds.
Pulse off time in seconds.
Number of pulse-measure cycles.
Custom sweep functions
Functions for list (custom) sweeps are listed in
Table 5-4
Custom sweep functions
Command
Description
SweepIListMeasureV(smu, ilist, stime, points)
smu
ilist
stime
points
Define current list sweep:
Smu: smua for channel A or smub for channel B.
List of current values in amps.
Settling time (source-measure delay in seconds).
Number of points
(
≥
2).
SweepVListMeasureI(smu, vlist, stime, points)
smu
vlist
stime
points
Define voltage list sweep:
Smu: smua for channel A or smub for channel B.
List of voltage values in volts.
Settling time (source-measure delay in seconds).
Number of points
(
≥
2).
Содержание SourceMeter 2600 Series
Страница 507: ...AppendixA Specifications Appendix A topics Model 2600S Specifications page A 2 2600S 901 01 Rev A May 2006...
Страница 575: ...AppendixF DisplayCharacterCodes Appendix F topics Introduction page F 2...
Страница 592: ......
Страница 593: ......