FAQs
Where can I find updated drivers or firmware?
For the latest drivers and additional support information, see
the Keithley Instruments support website.
To find drivers that are available for your instrument:
1. Go to
.
2. Enter
2470
and select
GO
.
My data looks odd or is wrong. What should I do?
Verify the connections from the instrument to the test fixture.
Also check the connections from the DUT to the test fixture
socket.
How do I change the command set?
In addition to the front panel, you can use a remote interface
to set up the instrument. You can choose one of the following
command sets:
•
SCPI: An instrument-specific language built on the SCPI
standard.
• TSP: A programming language that you can use to send
individual commands or combine commands into scripts.
You cannot combine the command sets.
As delivered from Keithley Instruments, the 2470 is set to
work with the SCPI command set.
To set the command set using the front panel:
1. Press the
MENU
key.
2. Under System, select
Settings
.
3.
Select the button next to
Command Set
.
4. Select the command set.
5. Select
OK
to reboot the instrument.
