![background image](http://html2.mh-extra.com/html/keithley/series-2200/series-2200_user-manual_4052955022.webp)
Getting Started
Connect to an External Computer with USB
1.
Load VISA on your computer. You can
download NI VISA from the National
Instruments website at www.NI.com.
2.
Connect the instrument to the computer
with a USB cable. The computer will
then recognize the power supply as a
USB device. If National Instruments
SignalExpress is installed, the computer
will also give you the option of running
that program.
For more information on loading
and running SignalExpress, see the
Connectivity Installation Manual on the
Documentation Browser CD that was
shipped with your instrument. You can
also download a copy of this manual
from www.Keithley.com/manuals.
Installing the System
This section contains information on how to install your instrument. Before performing the procedures on the next several
pages to verify that the instrument is ready to use, do the following:
Unpack the instrument and check that you received all the items listed as standard accessories.
Check that you also received any other accessories that you ordered with your instrument.
Check the Keithley website (www.Keithley.com) for the most current information.
Powering the Instrument On and Off
To power on the instrument follow these steps:
1.
Make all the connections.
2.
Properly set the 110 V / 220 V selector switch on the bottom of the instrument.
12
Series 2200 Multi-Channel Programmable DC Power Supplies User Manual
Содержание Series 2200
Страница 2: ......
Страница 4: ......
Страница 10: ...Preface iv Series 2200 Multi Channel Programmable DC Power Supplies User Manual...
Страница 37: ......